HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting.

This is the unit that is highly used and recommended by professionals worldwide. From Kite Makers to Special Forces. It is not uncommon for someone to be using the same HSG-0 Heat Cutter for 10 to 15 years and beyond. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 
 

HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting.

This 230 volt unit is usually purchase to be used in other countries other than the United States.

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 


 

HSGM HSG-0 Heat Cutter w/ Polyamid Housing: Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting.

The polyamid housing is stronger in a chemical environment and is not as easily cracked when dropped.

Note: This unit is available in 220 volts as a special order.  

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSGM HSG-0 Heat Cutter with Polyamid Housing and Kevlar Cord: This is a customer driven product that derived from a customer having problems with their operators cutting the cords to often while using the regular HSG-0 heat cutter. So to solve a customer's problem, our parent company started offering the HSG-0 w/Polyamid Housing and a Kevlar covering on the cord to keep users from cutting the cords. This is a hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting.  

Also available in 220 volt by special order. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSGM HSG-0 w/Spiral Cord Heat Cutter - Cord extends 25 ft+/- - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting.

Customer driven product: Comes with 10 ft. spiral cable (without plug) which stretches to approx. 25 ft. Customer's like to add their own locking plugs and it is excellent for areas where the heat cutter has to be shared between workstations.

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSG-1-VW Heat Cutter - Small unit with temperature control, suitable for a more continuous cutting operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-1-VW is the first step up from an HSG-0 unit for a more continuous use manual operation. The 160 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. 

This unit is available in 220 volts as a special order.

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSG-03-VW Heat Cutter  - Small unit with temperature control, suitable for a more continuous cutting operation. This unit has a stand-by temperature, the blade is pre-heated when the unit is turn on, therefore allowing quicker operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts.

The HSG-03-VW with its 250 watts is our mid-range unit for a manual production application where continuous longer and thicker material cuts are made. The more wattage in a unit helps keep the blade temperature more consistent during cuts with less cooling of the blade. The 250 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter than our popular HSG-0. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere.

This unit is available in 220 volts as a special order. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSG-3-VW Heat Cutter - Larger unit with temperature control, suitable for a more continuous cutting operation. This unit has a stand-by temperature, the blade is pre-heated when the unit is turn on, therefore allowing quicker operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts.

The HSG-3-VW with its 500 watts is our higher-range unit for a manual production application where continuous longer and thicker material cuts are made. The more wattage in a unit helps keep the blade temperature more consistent during cuts with less cooling of the blade. The 500 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. 

This unit is available in 220 volts as a special order. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSG-7-VW Heat Cutter (110V/700W) - Unit for more continous cutting of heavy duty thick ropes and webbing. Suitable to remove waste(threads) from beams and bobbins. Has stand-by temperature and infinitely variable working temperature.Two types of blades are available, straight-edge or curved edge.  

Note: This unit is available in 220 volts as a special order. 

HSG-00 Heat Cutter - Smallest unit with fixed blade for continuous quick, clean cutting and sealing of very fine cords, ropes, and webbing. 

This unit is available in 220 volts as a special order. 

HSG-00-VW Table Top - This unit is similar to the HSG-00, but with a wider blade; this unit has an infinitely variable temperature control dial to control the heat of the blade. Ideal for cutting and sealing synthetic ropes, webbing and cords.

This unit is available in 220 volts as a special order. 

HSG-4-VW - Unit suitable for more continuous operation, with fixed blade and infinitely variable temperature control dial for a variety of cutting operations. Designed to cut and seal heavy duty ropes and webbing.  

This unit is available in 220 volts as a special order. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

HSG-4-VW-mA w/Exhaust Fan - 500-Watt Unit suitable for more continuous operation, with fixed blade and infinitely variable temperature control dial for a variety of cutting operations. Designed to cut and seal heavy duty ropes and webbing. Comes with extraction fan to absorb fumes, which may develop during the working process, so they can be rerouted out of the work area.

This unit is available in 220 volts as a special order. 

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.