H/145 Terminal Stone - This part is for the do-it-yourselfer that wants a fairly simple way to mount a blade on a machine or some other creative project. This terminal stone would replace the Type M handle on our larger units and it has two holes in the high temperature plastic for mounting. The cables connect in one side and the blade is installed on the other. Even though this is a simple way to have a slitting device, we do not guarantee a satisfactory cut/seal because no testing and engineering has been considered from HSGM. When one orders custom blades, blade holders, and a power source from HSGM for a machine, testing and experience is a major factor when recommending the correct custom equipment for ones specific synthetic material. Plus it voids the unit warranty when one modifies any part of the unit.

H/604 - Optional Foot Pedal. The optional foot pedal is a modification accessory that can be connected to one of our larger units to eliminate the need for the trigger on the Type M handle. Just press the foot pedal with ones foot, within 6 to 8 seconds the blade heats up to desired temperature, then remove ones foot from the pedal to stop power to the blade and the blade will cool down. Note: HSGM recommends that this accessory be installed by an HSGM technician to keep from affecting any HSGM warranty. Please call for details. (HSG-1-VW through HSG-3-VW units sold separately.)

SFW Cutting Foot for Type M Handle - Used in combination with Type M bladeholder and Type R blade when no cutting surface is available. Mounting instructions included. NOTE: If you click on the picture to enlarge, it will show you a picture of the SFW Foot installed on a Type M handle w/type R blade. The Type M handle and the Type R blade are sold seperately.

2 Meter Replacement Cable for larger units

Adapter

Pin-Cable Lug-Male

Cable bushing PG 16

3 Meter Replacement Cable for larger units

Replacement mesh cable cover - 2 meter

Replacement mesh cable cover - 3 meter

Tool - Cross handle allen wrench for blade socket screws on Type M handle. Comes with a hole in the handle to secure it near the unit, so no one will remove the wrench from the work area. Also fits other screws on our larger units.

Type M Bladeholder, Complete.

Housing for Type M Bladeholder; consists of left and right side

Type M Handle Insulating Mounting Plate w/Connector Plate and Microswitch

Combines the Mounting Plate, connector plate, microswitch and blade sockets to save you time.

Microswitch