CREATE AN ACCOUNT
HSGM HSO-N Blade - Cutting blade to cut fabric. This is one of our better blades for cutting curves in fabric. 9mm heated cutting area which comes to a point. The HSO-N blade is very good for cutting where a precise touch is needed.
HSGM Type R blade - This is the original OEM Type R blade crafted by HSGM GmbH. This is a good general use blade for synthetic fabrics, webbing and ropes up to 17mm diameter. Excellent for cutting straight lines of synthetic fabrics. a.k.a. 100R blade.
HSGM Form 3 Heat Cutter Blade - This is a very good blade for cutting narrow widths and diameters of webbing, cords and ropes. It is also a good blade for reaching in the tight corners of bobbins.
TEMPORARILY OUT OF STOCK HSGM Type C 35mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard-to-reach areas.
HSGM Type C blade - 60mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard to reach areas.
HSGM Type H Sealing Element for Heat Cutter - This is one of the only elements that HSGM produces that is not designed to cut material. The Type H Sealing Element is designed to run down the edge of material to seal the edge only. It is mainly for material that has the correct measurements, but the edges need to be sealed so they will not fray.
HSGM Type HG Heat Cutter Blade - Cutting blade to remove threads from bobbins and small packages. It is also good for cutting flashing or selvage off finished product.
HSGM Type V Heat Cutter Blade – This blade is excellent for different types of cutting applications. The whole V section is the heating surface. The pointed tip is very good for making quick cuts across thin fabrics and the wider heated area at the top of the working area is good for cutting and sealing thicker material also.
HSGM Type VST Heat Cutter Blade - Cutting blade for a variety of heavier cutting operations. The entire head, V shape, of blade heats .
HSGM Type STA Heat Cutter Blade - This is another multi-purpose blade that can be used in a variety of applications with synthetic material. The whole "V" shape of the blade becomes heated and the working area has a more pointed tip. The outer edges of the “V” shaped working area has a beveled edge, but remember that the sharpened edge is not for cutting like a steak knife. The sharpened edge is only to assist the heated blade in separating the material while the heat does all cutting and sealing.
HSGM Type HS-S Heat Cutter Blade - Cutting blade with "V-shaped open mouth" heated surface which affords "top and bottom heating". Excellent blade for cutting and sealing of stronger fabrics such as awnings, sails, ground cover, netting and webbing. Also has a non-heated "foot" up front which can help guide the material up into the blade. The HS-S blade cuts similar to an open pair of scissors where you get it started and just push the blade across the material.
HSGM HS-S-V Blade - (SKU: H/271)The HS-S-V blade is another blade that is ideal for making long cuts off of a roll of material or any cut where a cutting surface is not important (e.g. Geotextile material installation). The HS-S-V blade is also know for being used for cutting ropes and cords and also piglet tails.
HSGM Type HS-SG Heat Cutter Blade - Cutting blade similar to the HS-S, with a smaller "V-shaped open mouth" and no "foot". The V shape in the middle of the blade is the part that heats up. This blade is also excellent for larger width materials. The HS-SG blade works like an open pair of scissors; just get it started and push the blade across to the other side of the fabric.
HSGM Type R-1 Heat Cutter Blade - Cutting blade used to separate ropes up to dia. 60mm (2.362 inches); also used to cut waste off large beams.
HSGM Round Heat Cutter Blades - 2 to 10 mm - Round cutting blade from 2mm to 10mm; useful for cutting and sealing holes into fabric, webbing and belting. These blades are sold each, not as a set. Recommended units to power this blade: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW. Please specify hole size and whether I.D. or O.D.. Made in Germany.
Round cutting blade from 11mm to 25mm; useful for cutting and sealing holes into webbing, belting or other fabrics. These blades are sold each, not as a set. Recommended units to power this blade: HSG-1-VW, HSG-03-VW, HSG-3-VW. Please specify hole size and whether I.D. or O.D.. Made in Germany.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 26 to 79 mm - Round cutting blade from 26mm to 79mm; useful for cutting and sealing holes in fabrics. Recommended units to power this blade: HSG-1-VW (Max. 50mm), HSG-03-VW (Max. 50mm), HSG-3-VW (Max. 160mm). These blades are sold each, not as a set. Please specify hole dimensions and whether I.D. or O.D..
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 80 to 120 mm - Round cutting blade from 80mm to 120 mm; useful for cutting and sealing holes in synthetic fabrics. These blades are sold each, not as a set. Suitable for unit HSG-3-VW.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 121 to 160 mm - Round cutting blade from 121mm to 160mm; useful for producers of filters, etc. These blades are sold each, not as a set. Suitable for unit HSG-3-VW. Please specify hole size and whether I.D. or O.D..
HSGM Round Heat Cutter Blade - 161 mm to 175 mm - Please call us and request a quote on round blades larger than 160mm 888-854-HSGM (4746). These blades are sold each, not as a set. Made in Germany.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other HSGM cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )