CREATE AN ACCOUNT
Use this form to search for a particular cutting product and the wizard will look for what best product suits your needs.
HSG-1-VW Heat Cutter - Small unit with temperature control, suitable for a more continuous cutting operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-1-VW is the first step up from an HSG-0 unit for a more continuous use manual operation. The 160 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
Heats up Time: 6-8 seconds Infinitely variable working temperature Blade temperature: 1110°F max. Supply voltage: 110V - 60Hz Power input: 160 Watt max. Continuous operation Illuminated rocker switch Power cord: 2 m, with US-type 3 prong plug. Cable from unit to handle: Standard 2 m Cable Class I protection Dimension: 155 x 220 x 105 mm Weight: 5.8 kg (12.8lbs) Made in Germany Recommended diameter for round and square blades: 2mm - 50mm Warranty: Limited 1 year warranty covering manufacture defects. Important Note: We do not recommend cutting any type of PVC (Polyvinyl Chloride) or PVC coated materials with HSGM equipment because of the dangerous fumes it releases. We do recommend wearing a breathing filter mask while cutting any type of material with HSGM equipment. Also always review the materials MSDS (Material Safety Data Sheet) before cutting with HSGM equipment.