Our site has several sections of content that may contain the information you are looking for. When you use the site search, you will find the results grouped by those sections.
Use this form to search for a particular cutting product and the wizard will look for what best product suits your needs.
HSGM C-180 hot knife blade. Designed for boards up to 7.1" (180mm). Blade length 7.5". Made in Germany. Recommend to be used with the HSGM HSG-G1-VW hot knife.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM Type C blade - 60mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard to reach areas.
HSGM Type R-1 Heat Cutter Blade - Cutting blade used to separate ropes up to dia. 60mm (2.362 inches); also used to cut waste off large beams.
HSGM C-200 hot knife blade. Designed for boards & blocks up to 7.87"(200 mm). Blade length 8.5". Made in Germany. Note: This blade is designed to be used with the HSGM HSG-G1-VW hot knife.
Cutting Shackle for HSG-0 - This is a device attaches to the HSG-0 heat cutter to easily cut ropes. The Cutting Shackle can also be used to cauterize piglet tails to reduce infections. HSG-0 heat cutter and blades sold seperately. The cutting shackle is designed to be used with the Type S blade (H/210) or the Type S-K blade (H/211). Click on the picture to see the Cutting Shackle attached to the HSG-0.
HSGM Type V Heat Cutter Blade – This blade is excellent for different types of cutting applications. The whole V section is the heating surface. The pointed tip is very good for making quick cuts across thin fabrics and the wider heated area at the top of the working area is good for cutting and sealing thicker material also.
HSGM Type VST Heat Cutter Blade - Cutting blade for a variety of heavier cutting operations. The entire head, V shape, of blade heats .
HSGM Type STA Heat Cutter Blade - This is another multi-purpose blade that can be used in a variety of applications with synthetic material. The whole "V" shape of the blade becomes heated and the working area has a more pointed tip. The outer edges of the “V” shaped working area has a beveled edge, but remember that the sharpened edge is not for cutting like a steak knife. The sharpened edge is only to assist the heated blade in separating the material while the heat does all cutting and sealing.
HSGM Type G-90 Heat Cutter Blade - Cutting blade used to cut rope, webbing and belting material. Great for guillotine style cuts.
HSGM Form 3 Heat Cutter Blade - This is a very good blade for cutting narrow widths and diameters of webbing, cords and ropes. It is also a good blade for reaching in the tight corners of bobbins.
HSGM Form 2 Heat Cutter Blade - This is an excellent blade for doing one shot guillotine cuts on webbing, ropes and cords. Just lay your material down on your cutting surface, then come straight down onto the material to achieve a precise cut and seal in one motion. a.k.a. F2 blade.
Engel Battery for B50 A Soldering Iron
Transformer 110Volt for HSG-0. Also available in 220V.
Combines the Mounting Plate, connector plate, microswitch and blade sockets to save you time.
H/604 - Optional Foot Pedal. The optional foot pedal is a modification accessory that can be connected to one of our larger units to eliminate the need for the trigger on the Type M handle. Just press the foot pedal with ones foot, within 6 to 8 seconds the blade heats up to desired temperature, then remove ones foot from the pedal to stop power to the blade and the blade will cool down. Note: HSGM recommends that this accessory be installed by an HSGM technician to keep from affecting any HSGM warranty. Please call for details. (HSG-1-VW through HSG-3-VW units sold separately.)
HSGM Type HS-S Heat Cutter Blade - Cutting blade with "V-shaped open mouth" heated surface which affords "top and bottom heating". Excellent blade for cutting and sealing of stronger fabrics such as awnings, sails, ground cover, netting and webbing. Also has a non-heated "foot" up front which can help guide the material up into the blade. The HS-S blade cuts similar to an open pair of scissors where you get it started and just push the blade across the material.
HSGM Type HS-SG Heat Cutter Blade - Cutting blade similar to the HS-S, with a smaller "V-shaped open mouth" and no "foot". The V shape in the middle of the blade is the part that heats up. This blade is also excellent for larger width materials. The HS-SG blade works like an open pair of scissors; just get it started and push the blade across to the other side of the fabric.
Engel 100 S Soldering Iron - Comes with tip 100WB, cleaning sponge, and sample coil solder. Excellent heavy duty soldering iron for electronic technicians and maintenance departments. 220 Volt units are available by special order.
HSGM Type F Heat Cutter Element - This heat element is mainly used to melt two pieces of rope on each side of the element, then slide the two sides of the rope off the element and push the two ends together causing them to seal together. Although it does seal the two ends together, there is no guarantee how strong it sealed. So it would have to be an application where strength was not a factor. The tip of the element is beveled if someone wanted to use it as a blade.
HSGM Round Heat Cutter Blades - 2 to 10 mm - Round cutting blade from 2mm to 10mm; useful for cutting and sealing holes into fabric, webbing and belting. These blades are sold each, not as a set. Recommended units to power this blade: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW. Please specify hole size and whether I.D. or O.D.. Made in Germany.
Type M Bladeholder, Complete.
Engel 100 S Soldering Iron complete with tip 100WB, cleaning sponge, sample coil solder, and hard plastic foam-lined carrying case. Keeps your equipment safe and secure during transport. Excellent heavy duty soldering iron for electronic technicians and maintenance departments. 220 Volt units are available by special order.