Our site has several sections of content that may contain the information you are looking for. When you use the site search, you will find the results grouped by those sections.
Use this form to search for a particular cutting product and the wizard will look for what best product suits your needs.
Serrated Lock Washer, each - Specify for which unit and location on the unit. (This is Only for the HSGM "M' Series models- NOT used on the Hand-Held HSG-0).
HSGM Rectangular or Square blade with circumfrence over 160mm - for cutting shapes out of synthetic materials. Call for a quote on this custom item. Cuts and seals simultaneously. Width min.4mm/max.100mm; length min.8mm/max.110mm. Please specify exact dimensions and whether I.D. or O.D. Suitable for unit HSG-3-VW.
HSGM Angle (WI) Heat Cutter Blade - for cutting of corners, etc. Custom order item. Please call for current lead time from Germany. For a quote; please specify exact measurements and provide sketch of desired blade, including angle.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 80 to 120 mm - Round cutting blade from 80mm to 120 mm; useful for cutting and sealing holes in synthetic fabrics. These blades are sold each, not as a set. Suitable for unit HSG-3-VW.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 121 to 160 mm - Round cutting blade from 121mm to 160mm; useful for producers of filters, etc. These blades are sold each, not as a set. Suitable for unit HSG-3-VW. Please specify hole size and whether I.D. or O.D..
HSGM Round Heat Cutter Blade - 161 mm to 175 mm - Please call us and request a quote on round blades larger than 160mm 888-854-HSGM (4746). These blades are sold each, not as a set. Made in Germany.
HSGM Oval Heat Cutter Blade up to circumference of 160 mm. Please call for a quote on this item. Designed to cut ovals out of synthetic materials. Please specify dimensions (Width min.3mm/max.100mm; length min.4mm/max.150mm). Also specify I.D. or O.D. Sold each, not as a set. Made in Germany.
HSGM Type F Heat Cutter Element - This heat element is mainly used to melt two pieces of rope on each side of the element, then slide the two sides of the rope off the element and push the two ends together causing them to seal together. Although it does seal the two ends together, there is no guarantee how strong it sealed. So it would have to be an application where strength was not a factor. The tip of the element is beveled if someone wanted to use it as a blade.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other HSGM cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM 55mm Heat Cutter Blade. Designed to cut & seal synthetic ropes, cords, & webbing. Replacement blade for unit HSGM HSG-00 Heat Cutter.
HSGM 70mm Heat Cutter Blade - Designed to cut & seal synthetic ropes, cords, and webbing. Replacement blade for HSGM HSG-00-VW Heat Cutter.
SF Cutting Foot for HSG-0; used in combination with HSG-0 and Type R blade helps stabilize your fabric for a high quality cut and seal when no cutting surface is available. This is the one and only original OEM SF Cutting Foot crafted by HSGM GmbH in Germany. The original SF cutting foot mounts directly to the HSG-0 heat cutter, has two points of adjustment and top and bottom support for the material. It is also plated to help prevent corrosion. Mounting instructions included. NOTE: If you click on the picture to enlarge it will show you a picture of the SF Foot installed on a HSG-0 heat cutter w/type R blade. The HSG-0 heat cutter and the Type R blade are sold separately.
H/604 - Optional Foot Pedal. The optional foot pedal is a modification accessory that can be connected to one of our larger units to eliminate the need for the trigger on the Type M handle. Just press the foot pedal with ones foot, within 6 to 8 seconds the blade heats up to desired temperature, then remove ones foot from the pedal to stop power to the blade and the blade will cool down. Note: HSGM recommends that this accessory be installed by an HSGM technician to keep from affecting any HSGM warranty. Please call for details. (HSG-1-VW through HSG-3-VW units sold separately.)
HSGM Styro-Cut 120 Hot Knife without blade (Blades shown in photo are available for purchase separately) - This particular polystyrene cutter is a great all around hot knife. It’s a great tool for hobbyist, crafts, schools, colleges, universities, and shipping departments to cut polystyrene boards/blocks to help tightly secure products while in transit to the customer. The Styro-Cut 120 hot knife is also designed where you can purchase Nichrome band and bend/modify the band to your preferred groove shape and connect the two ends of the band into the Styro-Cut 120 hot knife to have your on custom groove blade. Insulation contractors love cutting polystyrene with heat because of the fast clean cuts and no dust compared to cutting with a saw. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM Styro-Cut 140 Hot Knife w/C-140 blade - This is the work horse of our polystyrene cutters! Not only can this hot knife power fairly long straight blades, it can also power an assortment of special shaped blades to cut out shaped grooves into polystyrene boards and blocks. Just plug it in, press the trigger, wait about 10 seconds, and you're ready to make some creative cuts with this hot knife. This is the tool of choice for many professionals in multiple industries. The C-140 blade that is included will cut polystyrene boards/blocks up to 140mm (5.5 inches). (220V are available by special order.) Additional blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM Styrocutter G1-VW (HSG-G1-VW) w/temperature control dial - A more continuous use unit. Excellent for those long work days and has enough power heat HSGM blades 8 inches long with no dust involved. Also available in 220 Volt by special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM DSS 60 Hot Knife Blade is approx. 2.36 inches in length. To be used with the HSGM Styrocut 120 hot knife to cut polystyrene boards & blocks with ease and no dust.
90mm blade for the HSGM Styrocut 120 Hot Knife; medium length (app.3.54 inches) makes it very manueverable. Can cut shapes or slide straight into the polystyrene board/block, such as when cutting electrical box openings. Glides smoothly through polystyrene with no crumbling and no discoloration. Like cutting through air!
HSGM DSS 120 blade to be used with the HSGM Styrocut 120 Hot Knife to cut polystyrene boards & blocks with ease and no dust. Approximately 4.72 inches in length.