Our site has several sections of content that may contain the information you are looking for. When you use the site search, you will find the results grouped by those sections.
Use this form to search for a particular cutting product and the wizard will look for what best product suits your needs.
HSGM Type C 35mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard-to-reach areas.
H/145 Terminal Stone - This part is for the do-it-yourselfer that wants a fairly simple way to mount a blade on a machine or some other creative project. This terminal stone would replace the Type M handle on our larger units and it has two holes in the high temperature plastic for mounting. The cables connect in one side and the blade is installed on the other. Even though this is a simple way to have a slitting device, we do not guarantee a satisfactory cut/seal because no testing and engineering has been considered from HSGM. When one orders custom blades, blade holders, and a power source from HSGM for a machine, testing and experience is a major factor when recommending the correct custom equipment for ones specific synthetic material. Plus it voids the unit warranty when one modifies any part of the unit.
HSGM C-100 Hot Knife Blade
HSGM CN-20 Hot Knife Blade. Curved, for .79" (20 mm) wide and approx. 1" deep grooves into polystyrene boards & Blocks. Made in Germany.
HSGM C-140 Hot Knife Blade. For polystyrene boards or blocks 5.51"(140mm) thick. Blade length 6". Made in Germany. Note: This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife.
HSGM HSO-N Blade - Cutting blade to cut fabric. This is one of our better blades for cutting curves in fabric. 9mm heated cutting area which comes to a point. The HSO-N blade is very good for cutting where a precise touch is needed.
HSGM Type R blade - This is the original OEM Type R blade crafted by HSGM GmbH. This is a good general use blade for synthetic fabrics, webbing and ropes up to 17mm diameter. Excellent for cutting straight lines of synthetic fabrics. a.k.a. 100R blade.
HSGM Type HG Heat Cutter Blade - Cutting blade to remove threads from bobbins and small packages. It is also good for cutting flashing or selvage off finished product.
HSGM CV-20 hot knife blade. V-shape with depth guide, for .79" (20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM CS-20 hot knife blade. Square-shaped with depth guide, for .79" (20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM CR-20 hot knife blade. Curved with depth guide, for .79"(20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other HSGM cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM C-180 hot knife blade. Designed for boards up to 7.1" (180mm). Blade length 7.5". Made in Germany. Recommend to be used with the HSGM HSG-G1-VW hot knife.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM Type C blade - 60mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard to reach areas.
HSGM Type R-1 Heat Cutter Blade - Cutting blade used to separate ropes up to dia. 60mm (2.362 inches); also used to cut waste off large beams.
HSGM C-200 hot knife blade. Designed for boards & blocks up to 7.87"(200 mm). Blade length 8.5". Made in Germany. Note: This blade is designed to be used with the HSGM HSG-G1-VW hot knife.
HSGM Type V Heat Cutter Blade – This blade is excellent for different types of cutting applications. The whole V section is the heating surface. The pointed tip is very good for making quick cuts across thin fabrics and the wider heated area at the top of the working area is good for cutting and sealing thicker material also.
HSGM Type VST Heat Cutter Blade - Cutting blade for a variety of heavier cutting operations. The entire head, V shape, of blade heats .
HSGM Type STA Heat Cutter Blade - This is another multi-purpose blade that can be used in a variety of applications with synthetic material. The whole "V" shape of the blade becomes heated and the working area has a more pointed tip. The outer edges of the “V” shaped working area has a beveled edge, but remember that the sharpened edge is not for cutting like a steak knife. The sharpened edge is only to assist the heated blade in separating the material while the heat does all cutting and sealing.
HSGM Type G-90 Heat Cutter Blade - Cutting blade used to cut rope, webbing and belting material. Great for guillotine style cuts.
HSGM Form 3 Heat Cutter Blade - This is a very good blade for cutting narrow widths and diameters of webbing, cords and ropes. It is also a good blade for reaching in the tight corners of bobbins.
HSGM Form 2 Heat Cutter Blade - This is an excellent blade for doing one shot guillotine cuts on webbing, ropes and cords. Just lay your material down on your cutting surface, then come straight down onto the material to achieve a precise cut and seal in one motion. a.k.a. F2 blade.