Our site has several sections of content that may contain the information you are looking for. When you use the site search, you will find the results grouped by those sections.
Use this form to search for a particular cutting product and the wizard will look for what best product suits your needs.
HSGM Type H Sealing Element for Heat Cutter - This is one of the only elements that HSGM produces that is not designed to cut material. The Type H Sealing Element is designed to run down the edge of material to seal the edge only. It is mainly for material that has the correct measurements, but the edges need to be sealed so they will not fray.
HSGM Type C blade - 60mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard to reach areas.
HSGM Type C 35mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard-to-reach areas.
HSGM Form 3 Heat Cutter Blade - This is a very good blade for cutting narrow widths and diameters of webbing, cords and ropes. It is also a good blade for reaching in the tight corners of bobbins.
HSGM Type S-K Heat Cutter Blade - This blade is designed to be used with the Cutting Shackle (H/610), seen in our HSG-0 parts website section, for HSG-0 only. With the Type S blade combine with the cutting shackle, one can cut synthetic ropes and cords off of a coil or one handed with ease. The cutting shackle is sold separately.
HSGM Form 2 Heat Cutter Blade - This is an excellent blade for doing one shot guillotine cuts on webbing, ropes and cords. Just lay your material down on your cutting surface, then come straight down onto the material to achieve a precise cut and seal in one motion. a.k.a. F2 blade.
HSGM Type S Heat Cutter Blade - This blade is designed to be used with the Cutting Shackle (H/610), seen in our HSG-0 parts website section, for HSG-0 only. With the Type S blade combine with the cutting shackle, one can cut synthetic ropes and cords off of a coil or one handed with ease. The cutting shackle is sold separately.
HSGM Type R blade - This is the original OEM Type R blade crafted by HSGM GmbH. This is a good general use blade for synthetic fabrics, webbing and ropes up to 17mm diameter. Excellent for cutting straight lines of synthetic fabrics. a.k.a. 100R blade.
HSGM HSO-N Blade - Cutting blade to cut fabric. This is one of our better blades for cutting curves in fabric. 9mm heated cutting area which comes to a point. The HSO-N blade is very good for cutting where a precise touch is needed.
H/145 Terminal Stone - This part is for the do-it-yourselfer that wants a fairly simple way to mount a blade on a machine or some other creative project. This terminal stone would replace the Type M handle on our larger units and it has two holes in the high temperature plastic for mounting. The cables connect in one side and the blade is installed on the other. Even though this is a simple way to have a slitting device, we do not guarantee a satisfactory cut/seal because no testing and engineering has been considered from HSGM. When one orders custom blades, blade holders, and a power source from HSGM for a machine, testing and experience is a major factor when recommending the correct custom equipment for ones specific synthetic material. Plus it voids the unit warranty when one modifies any part of the unit.
HSGM HSG-0 w/Spiral Cord Heat Cutter - Cord extends 25 ft+/- - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Customer driven product: Comes with 10 ft. spiral cable (without plug) which stretches to approx. 25 ft. Customer's like to add their own locking plugs and it is excellent for areas where the heat cutter has to be shared between workstations. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter with Polyamid Housing and Kevlar Cord: This is a customer driven product that derived from a customer having problems with their operators cutting the cords to often while using the regular HSG-0 heat cutter. So to solve a customer's problem, our parent company started offering the HSG-0 w/Polyamid Housing and a Kevlar covering on the cord to keep users from cutting the cords. This is a hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Also available in 220 volt by special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter w/ Polyamid Housing: Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. The polyamid housing is stronger in a chemical environment and is not as easily cracked when dropped. Note: This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. This 230 volt unit is usually purchase to be used in other countries other than the United States. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. This is the unit that is highly used and recommended by professionals worldwide. From Kite Makers to Special Forces. It is not uncommon for someone to be using the same HSG-0 Heat Cutter for 10 to 15 years and beyond. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.