CREATE AN ACCOUNT
HSG-7-VW Heat Cutter (110V/700W) - Unit for more continous cutting of heavy duty thick ropes and webbing. Suitable to remove waste(threads) from beams and bobbins. Has stand-by temperature and infinitely variable working temperature.Two types of blades are available, straight-edge or curved edge. Note: This unit is available in 220 volts as a special order.
HSG-4-VW-mA w/Exhaust Fan - 500-Watt Unit suitable for more continuous operation, with fixed blade and infinitely variable temperature control dial for a variety of cutting operations. Designed to cut and seal heavy duty ropes and webbing. Comes with extraction fan to absorb fumes, which may develop during the working process, so they can be rerouted out of the work area. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-3-VW Heat Cutter - Larger unit with temperature control, suitable for a more continuous cutting operation. This unit has a stand-by temperature, the blade is pre-heated when the unit is turn on, therefore allowing quicker operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-3-VW with its 500 watts is our higher-range unit for a manual production application where continuous longer and thicker material cuts are made. The more wattage in a unit helps keep the blade temperature more consistent during cuts with less cooling of the blade. The 500 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-4-VW - Unit suitable for more continuous operation, with fixed blade and infinitely variable temperature control dial for a variety of cutting operations. Designed to cut and seal heavy duty ropes and webbing. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-ETC-250-S Hot Wire Cutting Table Unit, with hot wire and cutting arm; capable of cutting angles into polystyrene boards and blocks. It cuts polystyrene boards and blocks like a table saw, but a lot easier and without all the dust.
HSGM Styrocutter G1-VW (HSG-G1-VW) w/temperature control dial - A more continuous use unit. Excellent for those long work days and has enough power heat HSGM blades 8 inches long with no dust involved. Also available in 220 Volt by special order.Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-03-VW Heat Cutter - Small unit with temperature control, suitable for a more continuous cutting operation. This unit has a stand-by temperature, the blade is pre-heated when the unit is turn on, therefore allowing quicker operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-03-VW with its 250 watts is our mid-range unit for a manual production application where continuous longer and thicker material cuts are made. The more wattage in a unit helps keep the blade temperature more consistent during cuts with less cooling of the blade. The 250 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter than our popular HSG-0. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-1-VW Heat Cutter - Small unit with temperature control, suitable for a more continuous cutting operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-1-VW is the first step up from an HSG-0 unit for a more continuous use manual operation. The 160 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-00-VW Table Top - This unit is similar to the HSG-00, but with a wider blade; this unit has an infinitely variable temperature control dial to control the heat of the blade. Ideal for cutting and sealing synthetic ropes, webbing and cords. This unit is available in 220 volts as a special order.
HSG-00 Heat Cutter - Smallest unit with fixed blade for continuous quick, clean cutting and sealing of very fine cords, ropes, and webbing. This unit is available in 220 volts as a special order.
HSGM HSG-0 w/Spiral Cord Heat Cutter - Cord extends 25 ft+/- - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Customer driven product: Comes with 10 ft. spiral cable (without plug) which stretches to approx. 25 ft. Customer's like to add their own locking plugs and it is excellent for areas where the heat cutter has to be shared between workstations. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
3 Meter Replacement Cable for larger units
2 Meter Replacement Cable for larger units
HSGM HSG-0 Heat Cutter with Polyamid Housing and Kevlar Cord: This is a customer driven product that derived from a customer having problems with their operators cutting the cords to often while using the regular HSG-0 heat cutter. So to solve a customer's problem, our parent company started offering the HSG-0 w/Polyamid Housing and a Kevlar covering on the cord to keep users from cutting the cords. This is a hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Also available in 220 volt by special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM Styro-Cut 140 Hot Knife w/C-140 blade - This is the work horse of our polystyrene cutters! Not only can this hot knife power fairly long straight blades, it can also power an assortment of special shaped blades to cut out shaped grooves into polystyrene boards and blocks. Just plug it in, press the trigger, wait about 10 seconds, and you're ready to make some creative cuts with this hot knife. This is the tool of choice for many professionals in multiple industries. The C-140 blade that is included will cut polystyrene boards/blocks up to 140mm (5.5 inches). (220V are available by special order.) Additional blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
SFW Cutting Foot for Type M Handle - Used in combination with Type M bladeholder and Type R blade when no cutting surface is available. Mounting instructions included. NOTE: If you click on the picture to enlarge, it will show you a picture of the SFW Foot installed on a Type M handle w/type R blade. The Type M handle and the Type R blade are sold seperately.
HSGM Styro-Cut 120 Hot Knife without blade (Blades shown in photo are available for purchase separately) - This particular polystyrene cutter is a great all around hot knife. It’s a great tool for hobbyist, crafts, schools, colleges, universities, and shipping departments to cut polystyrene boards/blocks to help tightly secure products while in transit to the customer. The Styro-Cut 120 hot knife is also designed where you can purchase Nichrome band and bend/modify the band to your preferred groove shape and connect the two ends of the band into the Styro-Cut 120 hot knife to have your on custom groove blade. Insulation contractors love cutting polystyrene with heat because of the fast clean cuts and no dust compared to cutting with a saw. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
SF Cutting Foot for HSG-0; used in combination with HSG-0 and Type R blade helps stabilize your fabric for a high quality cut and seal when no cutting surface is available. This is the one and only original OEM SF Cutting Foot crafted by HSGM GmbH in Germany. The original SF cutting foot mounts directly to the HSG-0 heat cutter, has two points of adjustment and top and bottom support for the material. It is also plated to help prevent corrosion. Mounting instructions included. NOTE: If you click on the picture to enlarge it will show you a picture of the SF Foot installed on a HSG-0 heat cutter w/type R blade. The HSG-0 heat cutter and the Type R blade are sold separately.
Profile-Section-Adapter - This item connects to the unit like a blade with the two top prongs. The synthetic plate is to be ran across polystyrene boards to cut grooves that you shape yourself. The two top adjustment blocks can be slid in or out depending on how wide you want your groove. The blade band connects to the adjustable blocks from the bottom. It can cut groove widths up to 120mm (4.7 inches) maximum. Minimum groove width is 20mm. To be used with the Styrocut-G1-VW unit. Blade band is sold separately.
HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. This is the unit that is highly used and recommended by professionals worldwide. From Kite Makers to Special Forces. It is not uncommon for someone to be using the same HSG-0 Heat Cutter for 10 to 15 years and beyond. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter - Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. This 230 volt unit is usually purchase to be used in other countries other than the United States. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM HSG-0 Heat Cutter w/ Polyamid Housing: Hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. The polyamid housing is stronger in a chemical environment and is not as easily cracked when dropped. Note: This unit is available in 220 volts as a special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
Round cutting blade from 11mm to 25mm; useful for cutting and sealing holes into webbing, belting or other fabrics. These blades are sold each, not as a set. Recommended units to power this blade: HSG-1-VW, HSG-03-VW, HSG-3-VW. Please specify hole size and whether I.D. or O.D.. Made in Germany.
Type M Bladeholder, Complete.