CREATE AN ACCOUNT
HSG-ETC-250-S Hot Wire Cutting Table Unit, with hot wire and cutting arm; capable of cutting angles into polystyrene boards and blocks. It cuts polystyrene boards and blocks like a table saw, but a lot easier and without all the dust.
HSGM CV-20 hot knife blade. V-shape with depth guide, for .79" (20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
Profile-Section-Adapter - This item connects to the unit like a blade with the two top prongs. The synthetic plate is to be ran across polystyrene boards to cut grooves that you shape yourself. The two top adjustment blocks can be slid in or out depending on how wide you want your groove. The blade band connects to the adjustable blocks from the bottom. It can cut groove widths up to 120mm (4.7 inches) maximum. Minimum groove width is 20mm. To be used with the Styrocut-G1-VW unit. Blade band is sold separately.
HSGM CR-20 hot knife blade. Curved with depth guide, for .79"(20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM CS-20 hot knife blade. Square-shaped with depth guide, for .79" (20 mm) grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM CN-20 Hot Knife Blade. Curved, for .79" (20 mm) wide and approx. 1" deep grooves into polystyrene boards & Blocks. Made in Germany.
HSGM CN-26 Hot Knife Blade. Curved, for 1.02" (26 mm) wide and approx. 1" deep grooves into polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM C-200 hot knife blade. Designed for boards & blocks up to 7.87"(200 mm). Blade length 8.5". Made in Germany. Note: This blade is designed to be used with the HSGM HSG-G1-VW hot knife.
HSGM CN-14 hot knife blade. Curved, for .55" (14 mm) wide and approx. 1 1/4" deep grooves out of polystyrene boards & blocks. This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife. Made in Germany.
HSGM C-140 Hot Knife Blade. For polystyrene boards or blocks 5.51"(140mm) thick. Blade length 6". Made in Germany. Note: This blade is designed to be used with the HSGM Styrocut 140 hot knife or the HSGM HSG-G1-VW hot knife.
HSGM C-180 hot knife blade. Designed for boards up to 7.1" (180mm). Blade length 7.5". Made in Germany. Recommend to be used with the HSGM HSG-G1-VW hot knife.
HSGM C-70 hot knife blade
HSGM C-100 Hot Knife Blade
HSGM DSU Groove Hot Knife Blade – This blade is great for electricians who need to cut out grooves in polystyrene for wiring. It is also good for churches, schools, or artist making creative sculptures or props for theater. To be used with the HSGM Styrocut 120 hot knife.
Nichrome band ( HLL 4 x 0.5 mm), per foot. The Nichrome band can be bent/modified to your preferred groove shape and used with our Styrocut 120 polystyrene hot knife.
90mm blade for the HSGM Styrocut 120 Hot Knife; medium length (app.3.54 inches) makes it very manueverable. Can cut shapes or slide straight into the polystyrene board/block, such as when cutting electrical box openings. Glides smoothly through polystyrene with no crumbling and no discoloration. Like cutting through air!
HSGM DSS 120 blade to be used with the HSGM Styrocut 120 Hot Knife to cut polystyrene boards & blocks with ease and no dust. Approximately 4.72 inches in length.
HSGM DSS 60 Hot Knife Blade is approx. 2.36 inches in length. To be used with the HSGM Styrocut 120 hot knife to cut polystyrene boards & blocks with ease and no dust.
HSGM Styrocutter G1-VW (HSG-G1-VW) w/temperature control dial - A more continuous use unit. Excellent for those long work days and has enough power heat HSGM blades 8 inches long with no dust involved. Also available in 220 Volt by special order.Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM Styro-Cut 120 Hot Knife without blade (Blades shown in photo are available for purchase separately) - This particular polystyrene cutter is a great all around hot knife. It’s a great tool for hobbyist, crafts, schools, colleges, universities, and shipping departments to cut polystyrene boards/blocks to help tightly secure products while in transit to the customer. The Styro-Cut 120 hot knife is also designed where you can purchase Nichrome band and bend/modify the band to your preferred groove shape and connect the two ends of the band into the Styro-Cut 120 hot knife to have your on custom groove blade. Insulation contractors love cutting polystyrene with heat because of the fast clean cuts and no dust compared to cutting with a saw. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSGM Styro-Cut 140 Hot Knife w/C-140 blade - This is the work horse of our polystyrene cutters! Not only can this hot knife power fairly long straight blades, it can also power an assortment of special shaped blades to cut out shaped grooves into polystyrene boards and blocks. Just plug it in, press the trigger, wait about 10 seconds, and you're ready to make some creative cuts with this hot knife. This is the tool of choice for many professionals in multiple industries. The C-140 blade that is included will cut polystyrene boards/blocks up to 140mm (5.5 inches). (220V are available by special order.) Additional blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
Engel Replacement Lamp bulb for the B50 A and Model S 50 Soldering Irons (Sold Individually)
Engel Set Screw with dog point for B50 A and Model S 50 Soldering Irons.
Engel Replacement Light Fitting for B50 A and Model S 50 Soldering Irons (comes complete with 2 lamps)