CREATE AN ACCOUNT
H/145 Terminal Stone - This part is for the do-it-yourselfer that wants a fairly simple way to mount a blade on a machine or some other creative project. This terminal stone would replace the Type M handle on our larger units and it has two holes in the high temperature plastic for mounting. The cables connect in one side and the blade is installed on the other. Even though this is a simple way to have a slitting device, we do not guarantee a satisfactory cut/seal because no testing and engineering has been considered from HSGM. When one orders custom blades, blade holders, and a power source from HSGM for a machine, testing and experience is a major factor when recommending the correct custom equipment for ones specific synthetic material. Plus it voids the unit warranty when one modifies any part of the unit.
HSGM HSG-0 Heat Cutter with Polyamid Housing and Kevlar Cord: This is a customer driven product that derived from a customer having problems with their operators cutting the cords to often while using the regular HSG-0 heat cutter. So to solve a customer's problem, our parent company started offering the HSG-0 w/Polyamid Housing and a Kevlar covering on the cord to keep users from cutting the cords. This is a hand-operated heat cutting tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic material to prevent fraying and unraveling. Such as synthetic fabric, fiber, cords, ropes, webbing, and belting. Also available in 220 volt by special order. Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below.
HSG-7-VW Heat Cutter (110V/700W) - Unit for more continous cutting of heavy duty thick ropes and webbing. Suitable to remove waste(threads) from beams and bobbins. Has stand-by temperature and infinitely variable working temperature.Two types of blades are available, straight-edge or curved edge. Note: This unit is available in 220 volts as a special order.
HSGM Type HS-SG Heat Cutter Blade - Cutting blade similar to the HS-S, with a smaller "V-shaped open mouth" and no "foot". The V shape in the middle of the blade is the part that heats up. This blade is also excellent for larger width materials. The HS-SG blade works like an open pair of scissors; just get it started and push the blade across to the other side of the fabric.
HSGM Type R-1 Heat Cutter Blade - Cutting blade used to separate ropes up to dia. 60mm (2.362 inches); also used to cut waste off large beams.
HSGM Type G-90 Heat Cutter Blade - Cutting blade used to cut rope, webbing and belting material. Great for guillotine style cuts.
HSGM Round Heat Cutter Blades - 2 to 10 mm - Round cutting blade from 2mm to 10mm; useful for cutting and sealing holes into fabric, webbing and belting. These blades are sold each, not as a set. Recommended units to power this blade: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW. Please specify hole size and whether I.D. or O.D.. Made in Germany.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 80 to 120 mm - Round cutting blade from 80mm to 120 mm; useful for cutting and sealing holes in synthetic fabrics. These blades are sold each, not as a set. Suitable for unit HSG-3-VW.
(Custom Made in Germany) HSGM Round Heat Cutter Blade - 121 to 160 mm - Round cutting blade from 121mm to 160mm; useful for producers of filters, etc. These blades are sold each, not as a set. Suitable for unit HSG-3-VW. Please specify hole size and whether I.D. or O.D..
HSGM Rectangular or Square blade with circumfrence over 160mm - for cutting shapes out of synthetic materials. Call for a quote on this custom item. Cuts and seals simultaneously. Width min.4mm/max.100mm; length min.8mm/max.110mm. Please specify exact dimensions and whether I.D. or O.D. Suitable for unit HSG-3-VW.
HSGM Angle (WI) Heat Cutter Blade - for cutting of corners, etc. Custom order item. Please call for current lead time from Germany. For a quote; please specify exact measurements and provide sketch of desired blade, including angle.
HSGM Type F Heat Cutter Element - This heat element is mainly used to melt two pieces of rope on each side of the element, then slide the two sides of the rope off the element and push the two ends together causing them to seal together. Although it does seal the two ends together, there is no guarantee how strong it sealed. So it would have to be an application where strength was not a factor.The tip of the element is beveled if someone wanted to use it as a blade.
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other HSGM cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM Type MK Heat Cutter Blade -This Quarter sized replacement blade is for the H/121- HSG-MK-S1 cutter unit-"ONLY". Not for use with any other cutter unit. ( Ask for a Special MK Catalog for details- Part# H/121 )
HSGM 55mm Heat Cutter Blade. Designed to cut & seal synthetic ropes, cords, & webbing. Replacement blade for unit HSGM HSG-00 Heat Cutter.
HSGM 70mm Heat Cutter Blade - Designed to cut & seal synthetic ropes, cords, and webbing. Replacement blade for HSGM HSG-00-VW Heat Cutter.
SF Cutting Foot for HSG-0; used in combination with HSG-0 and Type R blade helps stabilize your fabric for a high quality cut and seal when no cutting surface is available. This is the one and only original OEM SF Cutting Foot crafted by HSGM GmbH in Germany. The original SF cutting foot mounts directly to the HSG-0 heat cutter, has two points of adjustment and top and bottom support for the material. It is also plated to help prevent corrosion. Mounting instructions included. NOTE: If you click on the picture to enlarge it will show you a picture of the SF Foot installed on a HSG-0 heat cutter w/type R blade. The HSG-0 heat cutter and the Type R blade are sold separately.
H/604 - Optional Foot Pedal. The optional foot pedal is a modification accessory that can be connected to one of our larger units to eliminate the need for the trigger on the Type M handle. Just press the foot pedal with ones foot, within 6 to 8 seconds the blade heats up to desired temperature, then remove ones foot from the pedal to stop power to the blade and the blade will cool down. Note: HSGM recommends that this accessory be installed by an HSGM technician to keep from affecting any HSGM warranty. Please call for details. (HSG-1-VW through HSG-3-VW units sold separately.)
SFW Cutting Foot for Type M Handle - Used in combination with Type M bladeholder and Type R blade when no cutting surface is available. Mounting instructions included. NOTE: If you click on the picture to enlarge, it will show you a picture of the SFW Foot installed on a Type M handle w/type R blade. The Type M handle and the Type R blade are sold seperately.
Cutting Shackle for HSG-0 - This is a device attaches to the HSG-0 heat cutter to easily cut ropes. The Cutting Shackle can also be used to cauterize piglet tails to reduce infections. HSG-0 heat cutter and blades sold seperately. The cutting shackle is designed to be used with the Type S blade (H/210) or the Type S-K blade (H/211). Click on the picture to see the Cutting Shackle attached to the HSG-0.