CREATE AN ACCOUNT
HSGM Type HS-SG Heat Cutter Blade - Cutting blade similar to the HS-S, with a smaller "V-shaped open mouth" and no "foot". The V shape in the middle of the blade is the part that heats up. This blade is also excellent for larger width materials. The HS-SG blade works like an open pair of scissors; just get it started and push the blade across to the other side of the fabric.
HSGM Type R-1 Heat Cutter Blade - Cutting blade used to separate ropes up to dia. 60mm (2.362 inches); also used to cut waste off large beams.
HSGM Type F Heat Cutter Element - This heat element is mainly used to melt two pieces of rope on each side of the element, then slide the two sides of the rope off the element and push the two ends together causing them to seal together. Although it does seal the two ends together, there is no guarantee how strong it sealed. So it would have to be an application where strength was not a factor.The tip of the element is beveled if someone wanted to use it as a blade.
HSGM HSO-N Blade - Cutting blade to cut fabric. This is one of our better blades for cutting curves in fabric. 9mm heated cutting area which comes to a point. The HSO-N blade is very good for cutting where a precise touch is needed.
HSGM Type R blade - This is the original OEM Type R blade crafted by HSGM GmbH. This is a good general use blade for synthetic fabrics, webbing and ropes up to 17mm diameter. Excellent for cutting straight lines of synthetic fabrics. a.k.a. 100R blade.
HSGM Type S Heat Cutter Blade - This blade is designed to be used with the Cutting Shackle (H/610), seen in our HSG-0 parts website section, for HSG-0 only. With the Type S blade combine with the cutting shackle, one can cut synthetic ropes and cords off of a coil or one handed with ease. The cutting shackle is sold separately.
HSGM Type S-K Heat Cutter Blade - This blade is designed to be used with the Cutting Shackle (H/610), seen in our HSG-0 parts website section, for HSG-0 only. With the Type S blade combine with the cutting shackle, one can cut synthetic ropes and cords off of a coil or one handed with ease. The cutting shackle is sold separately.
HSGM Form 2 Heat Cutter Blade - This is an excellent blade for doing one shot guillotine cuts on webbing, ropes and cords. Just lay your material down on your cutting surface, then come straight down onto the material to achieve a precise cut and seal in one motion. a.k.a. F2 blade.
HSGM Form 3 Heat Cutter Blade - This is a very good blade for cutting narrow widths and diameters of webbing, cords and ropes. It is also a good blade for reaching in the tight corners of bobbins.
HSGM Type C 35mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard-to-reach areas.
HSGM Type C blade - 60mm Heat Cutter Blade - This is a good blade for cutting thick low density filter material and certain foams. Excellent for hard to reach areas.
HSGM Type H Sealing Element for Heat Cutter - This is one of the only elements that HSGM produces that is not designed to cut material. The Type H Sealing Element is designed to run down the edge of material to seal the edge only. It is mainly for material that has the correct measurements, but the edges need to be sealed so they will not fray.
HSGM Type HG Heat Cutter Blade - Cutting blade to remove threads from bobbins and small packages. It is also good for cutting flashing or selvage off finished product.
HSGM Type V Heat Cutter Blade – This blade is excellent for different types of cutting applications. The whole V section is the heating surface. The pointed tip is very good for making quick cuts across thin fabrics and the wider heated area at the top of the working area is good for cutting and sealing thicker material also.
HSGM Type VST Heat Cutter Blade - Cutting blade for a variety of heavier cutting operations. The entire head, V shape, of blade heats .
HSGM Type STA Heat Cutter Blade - This is another multi-purpose blade that can be used in a variety of applications with synthetic material. The whole "V" shape of the blade becomes heated and the working area has a more pointed tip. The outer edges of the “V” shaped working area has a beveled edge, but remember that the sharpened edge is not for cutting like a steak knife. The sharpened edge is only to assist the heated blade in separating the material while the heat does all cutting and sealing.
HSGM Type HS-S Heat Cutter Blade - Cutting blade with "V-shaped open mouth" heated surface which affords "top and bottom heating". Excellent blade for cutting and sealing of stronger fabrics such as awnings, sails, ground cover, netting and webbing. Also has a non-heated "foot" up front which can help guide the material up into the blade. The HS-S blade cuts similar to an open pair of scissors where you get it started and just push the blade across the material.
HSGM HS-S-V Blade - (SKU: H/271)The HS-S-V blade is another blade that is ideal for making long cuts off of a roll of material or any cut where a cutting surface is not important (e.g. Geotextile material installation). The HS-S-V blade is also know for being used for cutting ropes and cords and also piglet tails.