Detail

   Search The Store  

Home » Fabric Cutters » HSG-1-VW Heat Cutter (160W/110V)
HSG-1-VW Heat Cutter (160W/110V) H/111

HSG-1-VW Heat Cutter (160W/110V)

$941.82 SKU: H/111
HSG-1-VW Heat Cutter - Small unit with temperature control, suitable for a more continuous cutting operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. The HSG-1-VW is the first step up from an HSG-0 unit for a more continuous use manual operation. The 160 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. 

This unit is available in 220 volts as a special order.

Blades are sold separately. Recommended blades for this particular unit can be found by clicking the "Related Blades" tab below. 

Heats up Time:  6-8 seconds

Infinitely variable working temperature

Blade temperature:  1110°F max.

Supply voltage: 110V - 60Hz

Power input: 160 Watt max.

Continuous operation

Illuminated rocker switch

Power cord:  2 m, with US-type 3 prong plug.

Cable from unit to handle: Standard 2 m Cable

Class I protection

Dimension: 155 x 220 x 105 mm

 Weight: 5.8 kg (12.8lbs)

Made in Germany

Recommended diameter for round and square blades:
2mm - 50mm

Warranty:
 Limited 1 year warranty covering manufacture defects.

Important Note:
We do not recommend cutting any type of PVC (Polyvinyl Chloride) or PVC coated materials with HSGM equipment because of the dangerous fumes it releases. We do recommend wearing a breathing filter mask while cutting any type of material with HSGM equipment. Also always review the materials MSDS (Material Safety Data Sheet) before cutting with HSGM equipment.